11 RV Washing Mistakes That Strip Wax and Soak Seals
By Bev Lindqvist · November 1, 2026
The first full year I lived in my 40-foot diesel Class A, I kept a cleaning log in a spiral notebook, and later I’d learn how mobile RV detailers in Phoenix handle the same job. May 14th, 2017. I washed the roof of my motorhome at a state park near St. George, Utah, at two in the afternoon in 95-degree heat, and I’ve since learned that trailer washing in Tucson is just as brutal in summer. The soap dried before I could rinse it, and I spent the next hour scrubbing chalky film off the gelcoat with a microfiber and a lot of muttering, which is why I now check trailer washing in Mesa for pro tips on desert washing. That log is now a list of everything I got wrong, and I’ve turned it into the 11 mistakes below. Here are the 11 RV washing mistakes I made or saw at campgrounds, and what actually works.
If your rig’s been sitting in the desert sun and you’d rather compare what a pro would charge, I’ve checked prices from mobile RV detailers in Phoenix, and you can see current trailer washing prices in Phoenix to compare. It’s a quick way to see whether your time is worth more than their quote, and if you have a boat too, get RV and boat detailing quotes from the same shops.
1. Dish soap strips wax and dries out seals
My first wash involved a big blue bottle of dish soap. Cheap, and it cut grease. Bad idea. Dish soap is a degreaser, so it pulls the wax right off gelcoat and full-body paint. It also leaches oils from rubber seals and slide gaskets. After one season my decal edges looked dull and the slide seals felt stiff to the touch. The fix costs very little: buy a pH-neutral car wash shampoo made for RVs, or a mild liquid detergent the fiberglass panel maker approves.
If the thought of hauling out buckets and brushes makes your back ache, a mobile RV detailer in your area can do the wash while you check the torque on your lug nuts.
2. Washing in direct sun bakes soap onto gelcoat
Utah taught me this one hard. When the sidewall is hot to the touch, the soap dries in streaks before you can rinse, and hard-water minerals bake into clear coat. I now wash in the early morning or late evening, or in the shade of a big cottonwood. If you must wash in heat, do one section at a time, keep a hose with a shutoff nozzle in the other hand, and rinse from the bottom up on walls so the soap doesnt run down dry paint. Last summer, I found several trailer washing crews in Phoenix that start at dawn for exactly this reason.
3. Pressure washer too close to seals, vents and decal edges
A pressure washer is a great tool until you lift a decal edge with a zero-degree tip. Ask me how I know. The vinyl graphics care bulletin from the maker of my coach’s stripes says hold the nozzle at least 12 inches away, perpendicular to the graphic, and stay under 1,200 psi. I’d add: never point it at a window gasket, roof vent seal, slide seal or the edge of a decal. High-pressure water finds it’s way past sliding-window overlaps and soaks the insulation. These days I use a soft-bristle brush and a regular hose around all those spots, and I only pull out the pressure washer for the undercarriage and wheels.
4. Washing the sides before the roof
This one’s pure sequence, and almost nobody does it right on the first try. Wash the sides and then the roof, and all the dirt and roof cleaner bleach runs down your clean walls leaving gray streaks. Always start at the top and work down: roof first, then caps, then sidewalls, then wheels dead last. When I detail a full 40-foot coach, the roof takes me an hour on a ladder or from the roof itself, and I’m still sore the next day. A roof brush on a telescoping pole saves me from walking the membrane if I’m not up for it. If you’d rather keep both feet on the ground, look at trailer washing in Tucson for crews that include the roof in a premium wash.
5. One bucket and a gritty brush scratch the finish
In my first full-time year, I used one plastic bucket and a stiff truck brush I’d had for a decade. The fix costs $30: two buckets with grit guards, a lambswool or microfiber wash mitt for the body, and a seperate mitt or brush for wheels and lower panels. Never let the mitt touch the ground, and rinse it in the secound bucket after every panel. That’s the cheapest way to avoid oxidation and swirl marks from a mobile detailer’s perspective, which you can read about in our post on what a full RV detail includes.
6. Skipping gutters and drip spouts means permanent black streaks
The black streaks on your sidewalls come from rain running off the roof and through the gutters, carrying dust and organic crud. I spent an afternoon last spring scraping black goo out of my drip rails with an old plastic spatula, then flushed them with a garden hose. The fix after that: extend the drip spouts with flexible vinyl gutter extensions so the runoff misses the walls. While I’m up there, I clean the gutters evry other month during bug season. If the whole job sounds like too much, a trailer washing pro in Mesa can do the gutters and streaks in a few hours.
I found a video that covers some of these caravan and motorhome cleaning mistakes in more detail.
7. Abrasive pads and magic erasers dull gelcoat and decals
Melamine foam pads, like those ‘magic erasers,’ are basically fine sandpaper. On my fiberglass rear cap, they left swirl marks you can see in the afternoon sun. For stubborn bug guts or tar, I use a bug sponge with a nylon mesh cover and a plastic scraper for the flat chunks, then a cleaner labeled safe for RV fiberglass. If you have to scrub, keep the pressure light and test on a small spot behind a storage door first.
8. Letting hard water air dry leaves mineral spots
The water at a campground in Moab turned my black driver’s side into a spotted gray mess in one afternoon. The fix is two-pronged: dry with a good microfiber towel or a California water blade right after rinsing, and for spot-free rinses use deionized water. I bought a DI filter that threads onto my hose for about $90, and it’s paid for itself in saved polishing time.
9. Petroleum or citrus cleaners on a rubber roof void warranties
My first rubber roof cleaner was a citrus degreaser I used on my bicycle chain. Big mistake. The EPDM membrane maker’s care sheet forbids cleaners with petroleum solvents, harsh abrasives or citrus ingredients, and says they can cause irreparable damage or void the warranty. For tough black streaks on the roof, the membrane maker allows a cloth dampened with mineral spirits on a small section, but never soaked in. If you decide a pro shoudl do the roof, ask them what cleaner they use and mention your RV detailing prices research.
10. Washing where it’s banned or into storm drains
I once parked in a county park in Oregon that had a sign: no RV washing, $100 fine. Federal stormwater permits treat individual car washing differently, but local laws can be strict. Before you wash, ask the office or check your city’s website. If you’re not allowed to wash at your own site, a mobile detailer with a water reclaim setup is the fix; many RV and boat detailers in Phoenix carry drainage mats and vacuums for exactly this.
11. Forgetting to close vents, windows and slide gaps
This is the mistake that ended my first full-time year’s cleaning log with a soggy bed. Now my pre-walk checklist before any wash includes: roof vents closed, windows cranked tight, range hood flapper closed, slide toppers cleaned and slide seals tucked, and the door shut. It takes two minutes and has saved me from drying a queen mattress in a parking lot again.
The $20 test I run before any wash
Before I start spraying anything on my coach, I take a clean white microfiber and wipe a 12-by-12-inch patch of the rear cap just below the roof line.
If I were starting over, I’d do two things differently: I’d buy a deionized water filter in month one, and I’d pay a mobile detailer for the first full wash and wax so I could watch how they handle the roof, the decals, and the seals.
This weekend, if your parked somewhere with a spigot, run the towel test on your own rig. Then pull up two mobile detailers or a shop with an RV bay near you and ask both for a written per-foot quote on the same job. That comparison is worth more than any blog post, including this one.
Keep reading
FAQ
Can I use dish soap to wash my RV?
No. Dish soap is a degreaser that strips wax, sealant, and natural oils from rubber seals and slide gaskets. It can also fade decals and leave a dull film on clear coat. Use a pH-neutral car wash shampoo or a mild liquid detergent approved by your RV's fiberglass panel maker. The extra $15 a year is the cheapest protection you can buy for your finish.
What PSI is safe for washing an RV?
No single PSI is universally safe becuase it depends on distance, nozzle tip, and what you're spraying. For vinyl decals, the graphics maker's care sheet says stay under 1,200 psi, hold the nozzle at least 12 inches away, and never aim at a decal edge. For seals, vents, and window gaskets, skip the pressure washer entirely and use a regular hose with a shutoff nozzle. The zero-degree red tip is never safe on any RV surface.
Should I wash the roof or the sides first?
Roof first, always. If you wash the sides first, dirt and cleaner runoff from the roof will streak the freshly washed walls. Start at the top and work down: roof, front and rear caps, sidewalls, then wheels last. This sequence also keeps your rinse water from recontaminating lower panels. On a 40-foot coach, doing it in the wrong order adds about 45 minutes of re-washing.
How do I remove hard water spots from RV paint?
Hard water spots are mineral deposits left when water evaporates. For fresh spots, drying with a microfiber after rinsing prevents them. For old spots, wash the panel, then use a cleaner made for water spots and scale, or a diluted vinegar solution (test a small area first, never on hot paint). If spots are etched, polish the panel with a fine compound and a dual-action polisher, then re-wax. A deionized water filter on your hose prevents new spots.
Can I use vinegar to wash my RV?
In small amounts, yes. One motorhome maker's care sheet suggests adding a little vinegar to the wash water to soften hard water, and it can help remove mineral spots if diluted properly. But don't use straight vinegar on paint or gelcoat; it's acidic and can dull certain finishes over time. Always rinse well and dry. For regular washing, stick with a pH-neutral RV shampoo.
Why do black streaks keep coming back on my RV?
Black streaks are the residue of dirt and organic crud that runs off the roof and gutters every time it rains. If they come back fast, the gutters are probaly clogged or the drip spouts are too short, dumping runoff onto the sidewalls. Clean the gutters every few months, extend the spouts with flexible vinyl tubing, and keep the roof clean. A roof wax or protector can reduce streaking. If you're washing, adress the roof and gutters before scrubbing the streaks.
Is it safe to use a magic eraser on RV fiberglass?
No. Melamine foam pads like magic erasers are abrasive, similar to very fine sandpaper. They will dull gelcoat and can scratch clear coat or decals. Use only non-abrasive tools: lambswool mitts, microfiber towels, soft-bristle brushes. For stubborn bugs or tar, use a bug sponge with a nylon mesh cover and a cleaner safe for RV surfaces and test on a hidden area first.
Find RV detailers near you
Compare RV detailers and mobile washes in your city, then ask a few for a price.
Browse by stateOr jump to: RV wax & oxidation removal · Scottsdale, AZ · Wichita, KS · Port St. Lucie, FL