Pro Hydro Clean Master Detailing Studio
Family-owned RV detailing studio in Fort Pierce with a 5.0 rating from 127 reviews, offering ceramic coating and mobile service.
Four ceramic coating shops serve Fort Pierce, and seven more sit close enough to make the drive. All four hold a perfect 5.0 rating, which tells you the local bar is high and the competition is real. Coating a fiberglass cap or a full sidewall is not a wax job, so the installer matters more than the bottle. Here is how the options shake out.
Family-owned RV detailing studio in Fort Pierce with a 5.0 rating from 127 reviews, offering ceramic coating and mobile service.
Mobile detailing in Fort Pierce with a 5.0 rating from 16 reviews, covering wash, wax and ceramic coatings.
Treasure Coast shop for RV and auto detailing: washes, paint correction, ceramic coating and metal polishing, mobile service.
Boat and RV detailing in Fort Pierce with ceramic coating and wet sanding, rated 5.0 from 3 reviews.
Within a short drive of Fort Pierce. Plenty of mobile detailers cover a wide area, so ask even if they're a town over.
Mobile RV detailing in Port St. Lucie with 5.0 stars from 80 reviews. Ceramic coatings, wash, wax and roof work.
Port St. Lucie shop for RV wash, wax, and ceramic coating, with mobile service and 5.0 rating.
Mobile detailing for RVs, boats, and cars in Port St. Lucie. 4.9 stars from 134 reviews, known for wash, wax, and ceramic coating.
Mobile auto detailing in Port St. Lucie for RVs, cars and boats, rated 4.9 from 49 Google reviews.
Vero Beach detailer with a 5.0 rating from 25 reviews, known for careful washing and waxing.
Palm City detailer with a 4.6 rating and 51 reviews, known for ceramic coating and attentive service.
Mobile detailing for RVs, boats, and cars in Sebastian, FL. 5.0 stars from 66 reviews.
Pro Hydro Clean Master Detailing Studio leads on volume with 127 reviews at 5.0, and it is the only Fort Pierce shop here that lists roof work along with ceramic, mobile service, wax and oxidation removal. That range matters on an older coach where the front cap has gone chalky. Cars & Co Mobile Detailing and Ceramic coatings (16 reviews) and PBM Restoration & Coatings (13 reviews) both run mobile and offer ceramic alongside wash and wax. Flat Line Marine Services & Detailing is ceramic only with 3 reviews. Ask each one how many square feet of RV they coated last year before you book.
Ceramic on an RV is a sacrificial layer, not armor. It makes washing easier and slows UV fade on gelcoat, but Florida sun still wins eventually if you ignore it. Before any coating goes on, oxidation has to come off or you seal the chalk in. That is why the shops listing oxidation removal are worth a call first. Expect a multi day job on a full body, and expect a paint correction step to be quoted separately. A coating over swirls just locks them in.
Three of the four Fort Pierce shops are mobile, which solves the storage lot problem. If your rig lives at a storage yard, ask whether they bring their own water and power and whether the yard allows vendors on site. Some do, some do not, and getting turned away at the gate wastes everyone's morning. Mobile coating work also wants shade and a wind free spot, so a covered bay beats an open gravel pad. Confirm the travel radius too, since Fort Pierce spreads out toward the inlet and the farmland west of town.
Four are listed in Fort Pierce proper, and seven more are nearby. All four Fort Pierce shops hold a 5.0 average rating, with review counts ranging from 127 down to 3. Three of the four also offer mobile service.
Yes. Pro Hydro Clean Master Detailing Studio lists oxidation removal along with roof and interior work, fleet service, wax, wash and mobile visits. Oxidation should come off before any coating is applied, so start there if your fiberglass has gone chalky.
Often yes, but confirm two things first. Ask whether the shop brings its own water and power, and whether your storage yard lets outside vendors work on site. Three of the four Fort Pierce shops are mobile, so the logistics are usually the only obstacle.
Follow the installer's cure window, which varies by product, and ask for it in writing. After that, use pH neutral soap and a soft mitt, rinse before the sun dries the panels, and skip brush tunnels. That routine keeps the coating slick longer than any spray booster.